930 Classic Line

Spray pattern: oval flat-jet
Spray angle: 10° – 90°
Droplet size: 10 – 150 μm
Orifices: 0.5 – 2.2 mm
Capacity: 0.016 – 1.5 l/min
Atomising air pressure: from 0.5 bar

Anwendungsgebiete

Hier mehr erfahren

Outstanding homogenous spray pattern –
SCHLICK module system range 930 with continuously adjustable spray angle

  • Completely homogeneous and reproducible spray results
  • Extremely easy to adjust for maximum flexibility
  • Significant reduction in maintenance downtimes thanks to easy access to all components
  • Wide range of installation options thanks to modular construction
  • Maximum energy saving through adjustable pattern air
  • Functional components with a surface quality of Ra < 0.8 (also available as designs conforming to FDA)

External-mix two-substance nozzles allow independent control of the flow rate and fineness of the atomization. The flow rate for all models is controlled through the liquid pressure difference.

In the model with a regulating pin, the flow rate can also be regulated by the pin setting. The SCHLICK model 940 is manufactured as a modular construction. This means that it can easily be rebuilt into other designs. Replacement parts are available for all individual parts, with reproducible results ensured.

Standard bore holes for liquid operation are available with: 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 1.8 / 2.0 / 2.2 mm.
Customized bore sizes are possible starting from 0.3 mm upwards in 0.1 mm steps.

Materials: Acid-resistant stainless steel, brass, hastelloy, other materials available on request.

The angle of aperture of the flat jet is continuously adjustable between 10° and 90° using the adjusting screw on the nozzle unit. Turning the adjusting screw down to its limit stop produces a circular jet of approx. 10°; as the screw is slowly opened, this 10° circular spray becomes a flat jet. This allows the user to set any flat jet angle required up to a maximum of 90°. 

All nozzle forms can also be delivered with extended liquid inserts. These optimise the atomization of tacky liquids and minimise build-up at the air expulsion hole.

Professional Cleaning and Service

View into a SCHLICK cleaning set. You can see three tubes of synthetic lubricating grease, various brushes, a magnifying glass and various stainless steel tools.

The SCHLICK cleaning set includes all necessary tools for preservation of nozzle parts

3 x brush (ø 8, 14 and 20 mm)
1 x double cylindric-brush
1 x o-ring-tool (stainless steel)
1 x spoon-spatula (stainless steel)
1 x thread-cleaningbrush
1 x magnifying glass
3 x synthetic lubricating grease

Standing upright: three tubes of SCHLICK synthetic lubricating grease (PARALIC GTE 703).

Synthetic lubricating grease 
for valves and fittings with elastomer seals, compatible with EPDM and conforming to FDA. Can be dispensed in very small doses using special injection devices.

Standing upright: three tubes of special lubrication paste labelled OKS 250.

Special lubrication paste,
can be used at extreme temperatures (-40 – +1400°C).
Content: 100 g.

Safety data sheet OKS special lubrication paste

View of a SCHLICK portable control unit for two-substance nozzles for easiest installations.

Portable control unit for two substance nozzles for easiest installations.

– 2 pressure adjusted air flows
– 1 control-air flow
– integrated pressure gauge
– adjustable peristalitc pump for liquid flow (Watson Marlow)
– Body: all Stainless Steel

Especially developed for a very wide range of applications in laboratory or smallest production systems. Also designed for operations outside of the system, for example for testing and optimizing processes.   

Rolled PE hose material in three versions: blue for liquid, red for control air and black for atomising air.

Robust PE hose material for liquids (blue), control air (red) and atomising air (black); sold by the metre. 

Two angled fittings (plastic and brass chemically nickel-plated), next to them two straight fittings (brass chemically nickel-plated)

Fittings made from plastic, nickel-plated brass; straight and angled versions

Two angled fittings and next to them two straight fittings, each in stainless steel.

Fittings made from stainless steel 1.4404; straight and angled versions. 

Form 0
Basic model with dummy plug. Designed for the atomisation of liquids that are either siphoned or fed by gravity at a slight gradient. For homogeneous distribution on large specific surfaces.

Form 1
Dummy plug with swirl chamber. Designed for fine atomisation of liquids under pressure. Especially suitable for integration in wetting, moisturising, food glazing, coating, humidification equipment.

Form 3
Supplied with manual operated cleaning needle. For fast nozzle orifice cleaning during operation. Designed for the atomisation of sticky, impure, or highly viscous liquids, etc.

Form 4
Version with a liquid flow control needle. This design is particularly suitable for applications or atomisation tasks with highly variable flow rates.

Form 5
As form 4, but with a scale etched on the liquid control needle for fine setting of the flow rate, designed for research & Development, laboratories, etc.

Form 6
Design with straight (centric) liquid feed. This design is particularly suitable for atomising highly viscous solutions, pastes, lacquers, oils, etc.

Form 7
Pneumatically controlled liquid shut off using the atomising air. The needle closes the nozzle’s liquid orifice automatically and abruptly. Perfect for marking, signing and cyclical spraying. Drip-free.

Form 7-1
As form 7, but with needle operated  by independent  air supply. Leaving the atomising air to continue. Improving cyclical spraying, changes to process environment and no dripping, even with pressurised liquids.

Form 8
With solenoid valve, standard design: 230 V, 50 Hz, 100 % ED, ambient temperature: max. 55 °C, enclosure protection IP 65, cycling frequency limited only by the changeover time

Forms

News

Brochure "SCHLICK Technology – Overview"
The product overview shows all essential things at first glance

Go to PDF

Photovoltaics on all roof surfaces
ESustainable energy generation secures future power supply

Sustainability at SCHLICK

SCHLICK technology for SNCR & SCR processes
Sophisticated solutions for optimum nitrogen oxide reduction

Go to PDF

Your application.
Our nozzle.
Our promise: living for solutions.

Consultation, engineering, production and testing.
At SCHLICK, you get everything from one source.
The ideal solution for your application.

More details

Phone +49 9565 9481-0
Mail info(at)myschlick.com  

Düsen-Schlick GmbH

Hutstraße 4 | 96253 Untersiemau/Coburg
Telefon: +49 9565 9481-0
Mail: info(at)myschlick.com

© 2024 Düsen-Schlick GmbH