Nano ABC nozzle

Spray pattern: oval flatspray
Spray angle: approx. 60°
Orifices: 0.5 mm
Capacity: 1 – 10 g/min (coating)
Drum size: 8.5“ – 12“

Applications

More details

Designed for lowest capacities (1 - 10 g/min) –
the SCHLICK Nano nozzle model 951 Form 7-1 S24 ABC

  • No product build-up thanks to the SCHLICK Anti-Bearding Cap (ABC)
  • Perfect up- and downscaling for perfect production processes
  • Optimal homogenous and reproducible spray results 
  • GMP design: 9 individual parts + SCHLICK Precision-O-sealing-rings (EPDM-FDA)
  • Cleaning needle to standard
  • Available with liquid return system (locked as standard)
  • Extremely easy to adjust for maximum flexibility

Use this perfect nozzle technology right from the smallest batch size!
Our latest development, the SCHLICK Nano ABC nozzle, combines all the features of the SCHLICK ABC-Technology®. Specially developed for atomising the smallest quantities, the Nano nozzle is perfect for conducting initial tests on table-top devices.

Thanks to the SCHLICK Anti-Bearding Cap (ABC) the sticking and build-up of deposits is prevented as far as possible. The GMP design also enables a very simple installation/de-installation for cleaning or servicing by hand. This leads to low maintenance requirements and considerable cost savings.

The model 951 form 7-1 S24 Nano ABC is designed with separate attachments for the pattern air (PA) and the atomising air (AA). So, there is more freedom for adjustment. The atomising air connection can also be used as a retaining tube (M5). Min ID = 2.0 mm. A special stop position attaches the air cap, ensuring results remain uniform and operational errors are eliminated.

For the first time upscaling from laboratory to production is possible due to the use of ABC-Technology® throughout. Therefore reproducible results are guaranteed. The bore holes for liquid operation are produced with 0.5 mm. ATEX version also available.

Materials: FDA compliant 1.4404 (AISI 316L) materials, surface quality: Ra < 0.8. Other materials available on request.

Professional Cleaning and Service

View into a SCHLICK cleaning set. You can see three tubes of synthetic lubricating grease, various brushes, a magnifying glass and various stainless steel tools.

The SCHLICK cleaning set includes all necessary tools for preservation of nozzle parts

3 x brush (ø 8, 14 and 20 mm)
1 x double cylindric-brush
1 x o-ring-tool (stainless steel)
1 x spoon-spatula (stainless steel)
1 x thread-cleaningbrush
1 x magnifying glass
3 x synthetic lubricating grease

Standing upright: three tubes of SCHLICK synthetic lubricating grease (PARALIC GTE 703).

Synthetic lubricating grease 
for valves and fittings with elastomer seals, compatible with EPDM and conforming to FDA. Can be dispensed in very small doses using special injection devices.

Standing upright: three tubes of special lubrication paste labelled OKS 250.

Special lubrication paste,
can be used at extreme temperatures (-40 – +1400°C).
Content: 100 g.

Safety data sheet OKS special lubrication paste

View of a SCHLICK portable control unit for two-substance nozzles for easiest installations.

Portable control unit for two substance nozzles for easiest installations.

– 2 pressure adjusted air flows
– 1 control-air flow
– integrated pressure gauge
– adjustable peristalitc pump for liquid flow (Watson Marlow)
– Body: all Stainless Steel

Especially developed for a very wide range of applications in laboratory or smallest production systems. Also designed for operations outside of the system, for example for testing and optimizing processes.   

Rolled PE hose material in three versions: blue for liquid, red for control air and black for atomising air.

Robust PE hose material for liquids (blue), control air (red) and atomising air (black); sold by the metre. 

Two angled fittings (plastic and brass chemically nickel-plated), next to them two straight fittings (brass chemically nickel-plated)

Fittings made from plastic, nickel-plated brass; straight and angled versions

Two angled fittings and next to them two straight fittings, each in stainless steel.

Fittings made from stainless steel 1.4404; straight and angled versions. 

News

Brochure "SCHLICK Technology – Overview"
The product overview shows all essential things at first glance

Go to PDF

Photovoltaics on all roof surfaces
ESustainable energy generation secures future power supply

Sustainability at SCHLICK

SCHLICK technology for SNCR & SCR processes
Sophisticated solutions for optimum nitrogen oxide reduction

Go to PDF

Publications

  • Downscaling right down to the laboratory

    Spray nozzles for tablet coating in research and development departments

    In order to develop correct tablet coatings, until just a few years ago, pharmaceutical companies had to use coating drums, which wasted too many tablets in the test phase. Once the manufacturers of the coaters started to build more efficient tabletop units for research purposes, it was also clear to Düsen-Schlick that it would have to optimise its spray nozzles for these drum sizes. 

    Read more

  • Say Goodbye to Blockages

    Use of anti-bearding cap nozzles in fluidised bed systems

    Blocked spray nozzles are a widespread problem in fluidised bed systems in which very fine or tacky products are processed. By using ABC nozzles, the pharmaceutical excipient manufacturer DMV Fonterra Excipients has succeeded in avoiding unplanned downtimes. Düsen-Schlick Anti-bearding cap technology (ABC nozzles) is well-established in the field of tablet coatings.

    Read more

  • Nozzle ABCs for power users

    State-of-the-art nozzle technology enhances tablet coating productivity

    Improved spray arm design and advanced nozzle systems cut set up time in half on state-of-the-art tablet coaters. This has big advantages for contract manufacturers who have find efficient ways of dealing with frequent changeover.

    Read more

  • No weakness

    More operational safety in tablet coating

    In the pharmaceutical industry, flat spray two-substance nozzles are used in coating drums for the coating of pharmaceutical products. If possible, the coating process should not be interrupted for economical reasons. In addition to the geometry of the coater, the drying air and the spraying liquid, the nozzles play a particularly important role in this process. A new nozzle with an antibearding cap (ABC-Technology®) meets the requirement for operating security and improved handling during coating.

    Read more

  • Doubling spray rates

    New coating arm for tablet coater

    In tablet production, coating processes require a lot of manual operation and experience: The spray arms and nozzles that are used have to be constantly checked, and the spraying process variables require careful adjustment. A new nozzle and spray arm concept now allows you to achieve considerably more efficient processes.

    Read more

  • Process Engineering & Optimisation:

    Perfect atomisation without bearding

    Anti-bearding air cap ensures that droplets are well distributed, and that coating and moistening are homogenous. The type of nozzle used for coating and moistening determines the process result. Normally, flat spray two-substance nozzles are used for this process. A new, robust air cap withstands even the most adverse operating conditions and thus ensures a clean spraying process with the ideal drop size.

    Read more

  • Spray with sense

    New nozzle technology ensures better efficiency in tablet coating

    Time and again conventional spray arms cause trouble when coating tablets. They are often difficult to clean and are not easy to inspect. The result is a disruption to the process flow and unnecessarily long set-up times. A new spray arm concept promises to improve this situation.

    Read more

Your application.
Our nozzle.
Our promise: living for solutions.

Consultation, engineering, production and testing.
At SCHLICK, you get everything from one source.
The ideal solution for your application.

More details

Phone +49 9565 9481-0
Mail info(at)myschlick.com  

Düsen-Schlick GmbH

Hutstraße 4 | 96253 Untersiemau/Coburg
Telefon: +49 9565 9481-0
Mail: info(at)myschlick.com

© 2024 Düsen-Schlick GmbH