0/4

Flow rate of up to 300 l/h
External mixing for the toughest demands
Model 0/4 is designed as a lance model and can be individually adapted to a wide range of applications. The shaft lengths are adjusted depending on the specific needs. Thanks to the sophisticated design, very fine atomisation can be achieved when working with high volumes of liquid, even in the case of highly viscous liquids or suspensions. The tube-in-tube system protects the liquid supply at high ambient temperatures and facilitates uniform spraying.
Model Highlights
For Industries and Applications
Available in various designs
Modular system

The nozzles are produced using a modular system, and are available in various designs in order to allow for optimum adjustment in terms of viscosity, flow rate, density and surface tension.
Form 0
Basic model with blind plugs. For even distribution on large, specific surfaces. Easy installation/removal and maintenance.
Form 3
With manual cleaning needle. Fast cleaning of the nozzle orifice during operation. To atomise sticky, unclean or highly viscous liquids.
Form 4
Design with liquid quantity regulation needle. This design is particularly suitable for applications and atomisation tasks with highly variable flow rates.
Form 6
Design with straight (centric) liquid supply. This design is particularly suitable for the atomisation of highly viscous solutions, pastes, lacquers, oils, etc.
Form 7-1
With pneumatic control through control air. The nozzle needle (also available as a cleaning needle) closes the liquid outlet automatically. Ideal for rhythmic spraying tasks. No dripping.
Nozzle in Detail
CasingSanitiseFlavouringGas coolingGranulatingSuperheated steam coolingCoolingMixingReaction processesSCR procedureSNCR procedureSpray dryingNitrogen oxide reductionTobacco moisteningCombustionCombustion of heating oil ELCombustion of rich oilFluidised bed technology
Technical Data
Model | 0/4 |
Type | External Mixing |
Spray angle | 10° – 40° |
Spray pattern | Circular full-cone |
Droplet size | 10 – 50 μm |
Capacity | 0.83 – 5.0 l/min |
Standard orifices | 0.8 – 4.0 mm |