EHS Model Series 600

ONE universal nozzle design – THREE possible combinations –
NUMEROUS customer-specific connecting bodies.
Thanks to its extensive product range, the model series 600 can be used for a wide range of applications with pressure conditions up to 3000 bar and is based on a universal nozzle body, regardless of which nozzle characteristic you require – round jet, flat spray or blind plug. Our products are made using rust-free, vacuum-hardened stainless steel as standard. Our high-performance manufacturing technology and modern testing and measurement equipment guarantee that SCHLICK EHS products maintain a consistently high level of quality.
‘Manifold’ principle
The 600 model series is based on the ‘manifold’ principle: A connecting body (RWC connector) tailored to the customer’s specific needs supplies all the pressure nozzles that are installed. The key advantages are that all nozzles are supplied evenly and there are clearly defined distances between them. No hoses or connectors are required for the individual nozzles, there are few corners where dirt can build up and mounting errors are ruled out. This guarantees reproducible spray results with less – and therefore more cost-effective – maintenance and cleaning work.
Realizes multiple spray results and flow rates
The EHS RWC Connector

The RWC connector can be combined with the RS 600 model round jet nozzles and/or FS 600 model flat spray nozzles. You can also use the BS 600 blind plug, for example to change the working widths. Combining the three variants in different ways enables a huge range of spray patterns and flow rates to be achieved using the same connecting body.
Thanks to the design incorporated into the RWC connector, it can be fitted with FS 600 flat spray nozzles, allowing you to define the spray direction in advance and reproduce it again at any time when replacing the nozzles.
The RWC connector is individually designed to meet a wide variety of customer-specific application requirements. You tell us your requirements and we produce your connecting body. The compact design means that even the lowest installation heights and the smallest distances between the nozzles can be achieved.
ONE design – THREE different variants
Circular spray nozzle
RS 600

Size | Ø 8.8 / 11 mm |
Total length | 15 mm |
Bore sizes | Ø 0.2 – 2.0 mm |
Pressure range | 3000 bar |
Material | High-grade steel, hardened |
Flat spray nozzle, Spray angle: 6° – 60°
FS 600

Size | Ø 8.8 / 11 mm |
Total length | 15 mm |
Bore sizes | Ø 0.2 – 2.0 mm |
Pressure range | 3000 bar |
Material | High-grade steel, hardened |
Blind plug
BS 600

Size | Ø 8.8 / 11 mm |
Total length | 15 mm |
Pressure range | 3000 bar |
Material | High-grade steel, hardened |
Perfect Accessoires
For quick nozzle changes
EHS nozzle holder


The DH 600 SCHMIDT EHS nozzle holder ensures a proper connection and allows for quick nozzle changes. Equipped with standard connection thread 3/8 x 24 UNF IG, left-hand thread – other connection threads on request.
For welding
EHS angle piece


Nozzle changes firmly under control
EHS assembly pliers

