Nozzle Exit Units
EHS high-performance nozzle exit units up to 3000 bar
The nozzle exit unit, produced in hard metal, can be used at operating pressures of up to 3000 bar depending on its design. Different flow rates and different high operating pressures are achieved depending on the bore size. This makes it easy to adapt to the specific circumstances of the customer.
Precise
ME-R 03
| Connection thread | M 3 AG |
| Total length | 3.2 – 3.9 mm |
| Bore sizes | Ø 0.2 – 0.6 mm |
| Pressure range | 3000 bar |
| Material | High-grade steel, hardened |
Straightforward
ME-R 04
| Connection thread | M 4 AG |
| Total length | 5.3 mm |
| Bore sizes | Ø 0.2 – 1.9 mm |
| Pressure range | 3000 bar |
| Material | High-grade steel, hardened |
Efficient
ME-R 05
| Connection thread | M 5 AG |
| Total length | 5.8 mm |
| Bore sizes | Ø 0.4 – 2.7 mm |
| Pressure range | 3000 bar |
| Material | High-grade steel, hardened |
Robust
ME-R 06
| Connection thread | M 6 AG |
| Total length | 7.0 mm |
| Bore sizes | Ø 0.4 – 2.7 mm |
| Pressure range | 3000 bar |
| Material | High-grade steel, hardened |
The matching special tool
For the comfortable change of EHS nozzle exit units
Mastertool
For a fast and efficient workflow. The synthetic rubber rings incorporated into the handle not only support a firm hold. Their number also makes it easier to assign tools quickly and safely during the work process. For example, the EHS-Master Tool 03, which is required to change the ME-R 03 muzzle insert, has three rings on the handle.